Classification and characteristics of GI/GL Corrugated sheets
Release time：
2022-07-09 00:00
Source：
GI/GL Corrugated sheets, also known as profiled sheets, are made of color-coated steel sheets, galvanized sheets and other metal sheets that are rolled and cold-formed into various corrugated sheets. It is suitable for industrial and civil buildings, warehouses, and special buildings. , Roof, wall and interior and exterior wall decoration of large-span steel structure houses. It has the characteristics of light weight, high strength, rich color, convenient and quick construction, earthquake resistance, fire prevention, rain resistance, long life, maintenance-free, etc., and is widely used.
Most of them are cold-rolled steel sheets on the market, coated, galvanized or aluminum-zinc, and painted, with a width of 600-1200MM. They are specially used for building roofs and wall enclosures. Due to the good plasticity of GI/GL Corrugated sheets, it can better meet the requirements of various architectural shapes, with beautiful appearance, durable color, and environmentally friendly use.
GI/GL Corrugated sheets are usually classified in various ways according to the application site, plate wave height, lap structure, and material. According to the application parts, it is divided into roof panel, wall panel, floor deck and ceiling panel, etc. The architectural decoration effect is relatively novel and unique. According to the wave height classification, it is divided into high wave plate, medium wave plate and low wave plate. According to the material of the substrate, it is divided into hot-dip galvanized substrate, hot-dip galvanized and hot-dip galvanized aluminum substrate. According to the structure of the board seam, it is divided into lap joint, undercut and withhold structure.
Related news
What is the difference between hot rolled and cold rolled steel sheet?
In terms of appearance and surface quality, because the cold plate is obtained after the cold rolling process of the hot plate
What are the advantages of using Galvalume steel coil (GL)?
The surface of Galvalume steel coil (GL) has a characteristic smooth, flat and gorgeous star flower, and the base color is silvery white.
How to deal with the deviation of Galvanized steel coil (GI) printing process?
In the rolling process of Galvanized steel coil (GI), more and more printing process is used. By embossing and printing process, different surface effects can be obtained, which overcomes the problem of rolling surface of galvanized steel coil. The shortcomings of easy discoloration, delamination, and unsightly appearance, time-saving and labor-saving, low production cost, not easy to fade, anti-aging, good fire and rain resistance, make up for the shortcomings of ordinary steel coil rolling surface monotonous.
How to clean the surface of Stainless steel coil/ sheet
Regular cleaning and maintenance should be performed on the surface of the stainless steel coil/ sheet to maintain its surface and increase its service life. When removing the surface
What is the difference between low carbon steel and Cold rolled steel sheet
Cold rolling is made of hot-rolled coils as raw materials, which are rolled at room temperature below the recrystallization temperature. Cold rolled steel sheet is a steel plate produced through a cold rolling process, referred to as cold plate.
Focus on Prepainted galvanized coil,Galvanized Steel coil, Galvalume Steel coil
Address：Venture Building，Dongchang East Road
Leave Your Message
©2022 Shandong Hongyi New Material Co.,LTD. SEO Powered by www.300.cn This site supports IPV6 access Yunzixun
